News

Showing how to perform the CSS script by Andrey Shulgin or Cylinders efficiency using MT Pro automotive oscilloscope.

We now have a representative in St. Petersburg. From now on our products can be purchased at “EOBD”. Please find the details in the Contact Us section.

The new MT Pro software version has been released. This update includes absolutely new Cylinder efficiency test algorithm. Parameter accuracy calculation has been improved and CPS signal analysis has been corrected.

We've made a new video, showing how to catch multipoint injectors waveform using TL-mix4 mixer test lead and MT Pro automotive oscilloscope.

We’ve finally completed the VS vibration sensor upgrading. Sensors are already available for order.

We have upgraded the PS16 pressure sensor case, now it’s nickel chrome plated. Excellent key features in combination with perfect appearance and damage resistance.

We've made a new video, showing a full test on the battery, starter and alternator.

We made a new video. We demonstrate how to download a new automotive waveform to the library.

We’ve finally launched our new on-line product - Automotive Oscillogramm library. There is only Russian version available now. The English version is coming soon. We'll gladly receive your review or recommendations.

MT Pro 4.1 automotive oscilloscope form MLab is available for sale. Now you can buy whole set: oscilloscope, test probes and sensors you need. For a detailed description click the link.

A great diagnostician Eugene Irimia has made a new video, which demonstrates the process of repairing 2005 Renault Megane power windows, using our test leads. Subscribe to his channel and find a lot of useful information on car diagnosis and repair.

We made a new video. Diagnosing a timing belt system with the help of a PS16 pressure sensor and automotive oscilloscope MT Pro, connecting the sensor to the engine, oscilloscope tuning, oscillogram recording while idle running, increased load and cranking. I’ll demonstrate all of this with an example of Seat Ibiza.

TL-mlp multipurpose test lead is available now. It’s used to evaluate output voltage and record oscillograms from sensors, actuators, and other automotive electrical circuits. Contents of the test lead allows you to catch signal from car connectors, terminals, PCB pads, bare wires and other recessed areas. For a detailed description click the link.

TL-dif Differential Test Lead is available now. It сan be connected to crankshaft position sensor, electric generator windings, internal circuits of engine control unit. For a detailed description click the link.

TL-mix4 Mixer Test Leads for electromagnetic injectors, primary circuit or control signal of individual ignition coils diagnostic are available now. For a detailed description click the link.

SP-hook plunger test hook spare probes for TL-dif, TL-mix4, TL-mix6 test leads are available now. For a detailed description click the link.

SP-ac alligator clip spare probes for TL-dif, TL-mix4, TL-mix6 test leads are available now. For a detailed description click the link.

We have updated the description of the PDS pressure drop sensor, added new photos and schemes, that explain the sensor design more clearly.

SP-flexpin spare probes for TL-dif, TL-mix4, TL-mix6 test leads are available now. For a detailed description click the link.

There comes the closing stage of brand new TL-dif sensors’ manufacture. A detailed sensor description is coming soon.

There comes the closing stage of TL-mix4 sensors’ manufacture. A detailed sensor description and test results are coming soon.

TL-mix6 Mixer Test Leads for electromagnetic injectors, primary circuit or control signal of individual ignition coils diagnostic are available now. For a detailed description click the link.

We have significantly updated the circuit design of the PS16 pressure sensor. This allowed us to improve all the main characteristics of the sensor: the noise level and the response time have decreased, the sensor’s temperature stability has increased. Please note that the pressure conversion response has also changed. The updated settings for the MT Pro oscilloscope are available in the sensor description.

Diagnosing an ignition system with the help of a Lx4 sensor and automotive oscilloscope, connecting the sensor to the engine, oscilloscope tuning, oscillogram recording while idle running and increased load. I’ll demonstrate all of this with an example of Seat Ibiza.

OCS optical crankshaft sensors are available now. For a detailed description click the link.

AD-SET-PS100 adapters set for PS100 pressure sensor are available now. For a detailed description click the link.

Pressure sensors PS16 for diagnosing mechanical part of diesel engine are available now. For a detailed description click the link.

We’re currently developing a Vibration sensor. Detailed results of the work done are coming soon.

Adapters AD-M14-M12 for Pressure sensors PS16 are available now. For a detailed description click the link.

Flexible extension pipes AD-M14-flex for Pressure sensors PS16 are available now. For a detailed description click the link.

Rigid extension pipes AD-M14-rigid for Pressure sensors PS16 are available now. For a detailed description click the link.

We've developed a pre-production model of the vibration meter. We're currently working on tuning hardware and developing software.

Diagnosing a valve timing with the help of a depression sensor and automotive oscilloscope, connecting the sensor to the engine, oscilloscope tuning, oscillogram recording while idle running and cranking... I’ll demonstrate all of this with an example of Subaru Impreza.

We’ve launched our YouTube channel, where we’re going to upload reviews of our products, tutorial videos as well as videos related to our work. Sign up!

Pressure sensors PS16 for diagnosing mechanical part of engine are available now. For a detailed description click the link.

The design and construction of the vibration meter case have been thoroughly worked up. We are now moving on to the stage of prototype production.

Lx6 sensors for diagnosing distributor, DIS and COP systems are available now. For a detailed description click the link.

Lx4 sensors for diagnosing distributor, DIS and COP systems are available now. For a detailed description click the link.

We began to work on a large-scale project of a vibration meter. This portable device is designed to solve universal tasks related to measuring and analyzing vibrations as well as installation and repair work to eliminate them.

Lx1 sensors for diagnosing distributor, DIS and COP systems are available now. For a detailed description click the link.

We’re currently developing a test pin. Detailed results of the work done are coming soon.

Universal piezoelectric accelerometers are available now. For a detailed description click the link.

Now we are on Facebook. Subscribe and follow the news.

There comes the closing stage of Lx1/Lx4/Lx6 COP sensors’ upgrade. A detailed sensor description and test results are coming soon.

We’ve launched our website! Website content filling is underway. Keep up with the news.